XRAY - Model racing cars

Hi Guys

I am new here and i have a few questions

I own a T4 2013 with an RX4 chassis.

The car itself drives very smooth and nicely with a 4,5 T motor.

Now my question:
What part of the 2014 / 2015 are usefull to upgrade my T4 ?

I allready have the X-Ray CVD´s,Alu Dual Servo Saver Arm and Graphite Steering Plate Set and the Low-friction Kevlar Drive Belts.

thanks in advanced

cheers

lugi

2015 style swaybar end links for easier detweaking. You can cut down the 13-14 swaybars to make them fit. You can use ARC parts if they're more readily available. You need the plastic ends that mount to the bar, ball studs with a long thread, and open ball cups like the 15 uses on the camber links. I upgraded my 14s to this style, and it's really nice.

If you run large spurs, a 14 motor mount might be worthwhile, as it gives a lot more pinion clearance.

The steering rack also has 8.5mm spacing instead of only 8mm on the 13. I have no idea if that's noticeable or worthwhile.

But at a certain point it makes more sense to just buy the new car.

-Mike