MOTOR MOUNT FLEX ON SET UP SHEETS

coastal · **Joined:** Sat Oct 20, 2012 17:17:10 **Posts:** 91

Further to Skiddins Post re putting in the Motor turn on the set up sheets

How are people filling in the Motor Mount Flex?
Does yes mean you leave out the front screw to allow more flex as per the instructions?

or does no mean no screw as per the instructions?

DaleBurr · **Posted:** Tue Nov 18, 2014 10:49:14

I imagine it will be 50/50, making it guesswork when reading setup sheets

coastal · **Joined:** Sat Oct 20, 2012 17:17:10 **Posts:** 91

brano · **Posted:** Thu Jan 15, 2015 06:47:51

The screw with the nut must be used every time. Optional is the screw in front of the nut - this can or must be not used - depends on conditions.

coastal · **Joined:** Sat Oct 20, 2012 17:17:10 **Posts:** 91

DaleBurr · **Posted:** Thu Jan 15, 2015 11:13:39

I filled out my first '15 sheet, and the label says 'Motor mount flex'. So I think checking the box should mean the screw is removed (i.e. flex).

But I doubt there will be any consistency between setup sheets as it is unclear.

Lois · **Joined:** Thu Aug 07, 2014 10:05:05 **Posts:** 16

Skiddins · **Posted:** Thu Jan 15, 2015 16:04:02

Lois · **Joined:** Thu Aug 07, 2014 10:05:05 **Posts:** 16

But if you look at the last picture that shows the bottom isn't it obvious which screws are used?

Now I'm a little confused what we are looking at ...

coastal · **Joined:** Sat Oct 20, 2012 17:17:10 **Posts:** 91

Hagberg · **Posted:** Tue Jan 20, 2015 16:22:19

Not using the front screw of the motor mount means FLEX

coastal · **Joined:** Sat Oct 20, 2012 17:17:10 **Posts:** 91

XRAY - Model racing cars

MOTOR MOUNT FLEX ON SET UP SHEETS

Who is online