Thanks To the Xray Team @ ETS Hudy Arena

Skiddins · **Posted:** Tue Jul 08, 2014 02:24:20

I'd like to thank the Xray team for their help at the ETS at the Hudy Arena.
Particularly Alex Hagberg for putting up with all my questions, sorry

I never did manage to get my car to stop being loose despite trying many changes, but I had a lot of fun.

Alex, on your setup sheet are those outer rear link shims correct, 1mm?

Was the very low front roll centre to increase steering, make it more progressive or some other reason?

Thank
Skiddins

Mijo-dk · **Joined:** Fri Jan 03, 2014 08:40:09 **Posts:** 51

The outer 1mm shim is proberbly for the ARS.

I have made is for my self from the Photos I have seen. Ran it thuesday and it felt very good.

Skiddins · **Posted:** Thu Jul 10, 2014 02:45:21

No, I meant the 1mm on the rear hub carrier on the upper link

Mijo-dk · **Joined:** Fri Jan 03, 2014 08:40:09 **Posts:** 51

Hi
Yes , thats also what I answered. If you have ARS you have some kind of C hub rear. And you can not have more than 2mm shim on upper link. See your front of the car. I have 1 mm on my ARS rear upper link outsite in the wheel.

have now attacted pictures of ARS on my car

DaleBurr · **Posted:** Thu Jul 10, 2014 09:58:34

That looks okay. Personally I prefer the ARS used at last years event...

greyhead · **Joined:** Wed Apr 17, 2013 19:52:50 **Posts:** 183

the nut cracker!

Hagberg · **Posted:** Mon Jul 14, 2014 15:43:32

What's up Skiddins? Good to finally meet you. I used 1mm on top of the rear c-hub used together with the ARS system.

Skiddins · **Posted:** Mon Jul 14, 2014 18:39:58

andrewd · **Joined:** Sun Jan 20, 2013 16:33:16 **Posts:** 181

What is the make of spur gear shown in the picture

Mijo-dk · **Joined:** Fri Jan 03, 2014 08:40:09 **Posts:** 51

Hi

It's a Panaracer spur , I dont find them better , they are the same as xray , just like the look

phillip46 · **Joined:** Sun Dec 02, 2012 21:16:53 **Posts:** 33

Hi.what c hub do u use on the back and to what degree do u set the rear tow.is it a standerd front arm on the back.just interested.cheers

Mijo-dk · **Joined:** Fri Jan 03, 2014 08:40:09 **Posts:** 51

phillip46 · **Joined:** Sun Dec 02, 2012 21:16:53 **Posts:** 33

Thanks.if u dont mind.on the new little link, do you fit a washer under the inner mounting point an if so, how thick and how will the hight of the link affect the rear tow.do u know if xray will be selling a kit soon to do this.thanks

Mijo-dk · **Joined:** Fri Jan 03, 2014 08:40:09 **Posts:** 51

XRAY - Model racing cars

Thanks To the Xray Team @ ETS Hudy Arena

Who is online