XRAY - Model racing cars

xform/index2.php?act=print&ID=348&setup=t4_2014

I have posted a link to my setup sheet from the weekend the issue that I had was that it would on power kick out on the rear only slightly but enough for you to lose your line

Also what is the effect of bump steer

Thanks
Andrew

Are you really running 6mm front and 5mm rear ride height? That could make for a very strange handling car. Either run the chassis flat or the front a touch lower. 5.8 front and 6.0 rear is a good starting point for Stafford.

If it's still an issue after that try:
Tighter front belt and looser rear
Add shims between front shocks and tower (try 3 or 4mm)
Solid front block
Speed6 shell
Thinner diff oil (might cause over-rotation mid-corner so last resort)