XRAY - Model racing cars

Hello,

How i can adjust the Rear Toe-In step by step ?
In front rear i have the 1 Degrese Insert and in the rear rear the same.
How much toe in is this ?

Thanks for Help

If you have +1 in the RF blocks and standard dot in the RR block that is 2deg rear toe.

Skiddins

How i can calculate this ?

The "base" setting (with both front/rear "0" inserts) is 3° toe. The inserts are 0.5mm/0.5° or 1mm/1° offsets (from the center "0" position). From there it's just simple arithmetic.

I am new to tuning/setting up the T4 '13

For now I am using kit toe settings.

1) Is it possible to get more than 3 degrees rear toe in?

I race on foams and I understand more rear toe in gives less on power steering.

However, because the grip of foams I can possibly sacrifice some of the on power steering and use excessive rear toe in so I can slow the car down and steer at the same time.

Hopefully my understanding is correct and I have not just confused everyone

on the 13 you add shims behind the mounts to widen or adjust toe inmy sons car has a 1mm shim on the rear front mounts and about 1.75 on the rear rear,this gives 3 degrees,so if you want more just add more shims to the rear mounts