XRAY - Model racing cars

Hello

I Drive a Xray T4 14' with Speed Passion Reventon 1.1 ESC and a Speed Passion 10.5 Turn Motor. Now i have Spur 84 and Pinion 25. After 6-7 Minute the Motor Heat is 80 Celsius with Temp Gun. I drive Stock with Boost no Blinky. What i must adjust to have the Best way ? I have make Pictures from the Track. What FDR is Optimal for this Track ? Have someone a good setup ??

THANKS !

I'm running different motor and esc, but most run about 7,2 or so at my track, I think I ran 6.8 fdr last time. Our track is similar to yours.
You are now at 5,26 that's too low.

try 21/84 (48 dp) giving 7.6 fdr
so long as it revs out at the end of the straight,you might need to go up or down a tooth
how long are your races?after 6/7 minutes im not surprised its hot,what's the temp like just after a heat/race ?

Thank you guys !! You are great !

Now i test this at next time. I would like drive more than 6 Minutes because we have a stock cup and the final is 15 minutes.
The gearing is one of the thing i try. But the other thing is adjusting the ESC ?? I have no Idea to adjust the ESC correct.
I have many many options to try but i dont know with option i must start.

Thank you !

what tyres are you running? super sticky can bog the motor down causing it to get hot, also track/air temp will play a big part.

Bb

Hey,

Now im drive RIDE RE34 but im Switch to Sweep is better for the track im driving.
The Drivetrain is free.
I have contact with speed passion and many drivers not use boost.
I understand why not.