ORCAN GT3 factory carb setup.

fermente · **Joined:** Tue Jul 24, 2012 16:04:09 **Posts:** 7

Hello,
Could you please advise with the factory setup for ORCAN GT3-C and also ORCAN GT3-S engines (carb
setup)

Thank you

Roelof · **Posted:** Tue Jul 30, 2013 19:27:07

Have you tryed the Orcan website?

They are Novarossi based engines like RB, JPGimar and MAX so you should be able to find a setting. Mostly setting both needles to flush it should be startable.

fermente · **Joined:** Tue Jul 24, 2012 16:04:09 **Posts:** 7

Hi,
I couldn't find any information about the carb factory setup in ORCAN's website.
Thank you anyway. I will try to use the data from Novarossi.

Sam Craig · **Posted:** Thu Aug 08, 2013 03:49:54

I have a new engine gt3c and checked:

Idle 2.5 turns out
High speed needle 5.0 turns out
Low speed needle 2.5 turns out

fermente · **Joined:** Tue Jul 24, 2012 16:04:09 **Posts:** 7

Thank very much.

XRAY - Model racing cars

ORCAN GT3 factory carb setup.

Who is online