XRAY - Model racing cars

Hi.

This is my setup:


I want less aggressive model - what I must change?
In this setup when track gets more traction have model in corners bowl over (rolling up)

Any suggestions?

Perhaps, softer front springs and make the front track of the car wider.

And maybe thicker front oil

Few suggestions to your setup.....

+ Shock oil- 450cst
+ Front spring 2.8
+ Rear spring 2.6
+ Ackerman- 0mm
+ Bump steer- 2mm
+ Front droop- 6
+ Rear droop- 5
+ If Rear end is loose use split blocks on rear not solid

On your setup sheet you have said that you are running the solid lower suspension mount on the rear instead of the split mounts that come with the kit. This will make the rear end loose and make the car more aggressive.

Like Matt W mentioned, removing ackerman shims will smooth the steering out a lot.

Increase your rear droop, decrease your front droop.

Remove ackerman shims

Anti-dive up front

Linear rear spring