T3 and T4

denyrusli · **Joined:** Fri May 31, 2013 03:13:46 **Posts:** 4

Hiiii.....
Never find out a reliability car before.
Recently I've change all my rc 1/10 ep touring car to T3 and T4. But it makes me a little bit confuse, why the rear toe in is not perfectly same? Now the left rear is 3 degres and the other side is 4 degres. It happened for my both car. Already double check but not found any mistake when assembly.
Do anyone have the same problem with me? Very curious to know what is really happened.
Eventhough the handling of the car is extraordinary, love it very much.

Skiddins · **Posted:** Fri May 31, 2013 10:24:36

The mos t common cause is that one of the blocks that screws to the chassis is out of alignment;

They should both point inwards like the one on the left.

denyrusli · **Joined:** Fri May 31, 2013 03:13:46 **Posts:** 4

Hi Skiddins thks.
I also hv checked it out, nothing wrong with that.
Is it ok if I put a shim to make it equal for both left and right?

Skiddins · **Posted:** Fri May 31, 2013 13:03:20

denyrusli · **Joined:** Fri May 31, 2013 03:13:46 **Posts:** 4

Ok thks alot for your concern. I'll do your suggestion.

dontfeelcold · **Joined:** Sun Sep 12, 2004 06:32:10 **Posts:** 48

Swap your rear hubs left to right and see if the toe changes. I had the same problem and it turned out to be a warped hub.

denyrusli · **Joined:** Fri May 31, 2013 03:13:46 **Posts:** 4

XRAY - Model racing cars

T3 and T4

Who is online