XRAY - Model racing cars

i have the first xray t2 and need help with finding what size hex the screws are so if anyone knows what size they are any help would be appreciated
cheers kurt

I suggest you will check your instruction manual (or you can download it from the Download section under each car, here is the link where you can find all cars listed http://www.teamxray.com/teamxray/produc ... tName=Cars) where you have each section or step where you can find the sizes of screws.

you will need Allen wrenches 1.5mm, 2.0mm, 2.5mm and 3.0mm

Do t3'12 shocks fit the first t2

You need
2mm for all screws except
2.5mm for the shock absorber connections
1.5mm for the pinion screw and maybe the roll bar end connectors (if not it will be 2mm)

That's 3.0mm you need for the shockabsorber connections.
Mike

Oops very sorry, 3.0 indeed. I have a 2.5 which I do not use for anything and had a brain malfunction