T4 xray floating servo???

boggsy · **Joined:** Sun Jan 08, 2012 19:25:07 **Posts:** 39

Hi my t4 Servo mount I just noticed is not letting my servo float. I have a KO Propo RSX ONE10 servo which is very high quality. Can anyone shed light please on what to do? It would seem weird if I put spacers on the servo mount on the chassis :oops:

Ive adjusted the servo several times to make it gap away from the chassis to make it float but to no avail. Kindly help please.

Skiddins · **Posted:** Wed Nov 07, 2012 11:22:35

Is that a particularly big servo?

It probably doesn't matter if it's just touching the chassis, the important thing with the new mount is that isn't fixed on the outside of the chassis.

Skiddins

Bytestream · **Joined:** Mon May 02, 2011 20:27:54 **Posts:** 46

I run the KO Propo Rsx Response servo, which looks to be the same measurements where is counts and have quite a bit of room (1 1/2 - 2mm) to move it up or down. I actually moved it down because in the very top position the steering link to the bridge was hitting the top deck. I probably have 1mm right now between the bottom of the servo and the chassis.

boggsy · **Joined:** Sun Jan 08, 2012 19:25:07 **Posts:** 39

Bytestream · **Joined:** Mon May 02, 2011 20:27:54 **Posts:** 46

Hagberg · **Posted:** Thu Nov 08, 2012 09:12:16

Loosen the screws and push it towards the top of the mount. I am using this servo and its floating with a few mm's to spare.

boggsy · **Joined:** Sun Jan 08, 2012 19:25:07 **Posts:** 39

XRAY - Model racing cars

T4 xray floating servo???

Who is online