XRAY - Model racing cars

Hi all, I am building my NT1 2012 Spec and I found that I have about 2mm of play between the wheel nut and hub bearing. It happened to all the four wheels. This version is using the CVD for all four wheels. Refer to the red arrow. Is this normal?

Hi moveon,

make sure you press the wheel hub all the way down until you hear and feel it clicks into the place.

Hi mod,

Yes, you are right. The wheel nut didn't sit in fully. I installed wheels when it arrives and the play is gone. I have since break-in my RB TX engine with 6 tanks now. Now waiting for the setup kit to make adjustment.

Here is a photo of my NT1 with Radiopost Radio. The battery pack has not arrive so I am using futaba RX pack to break-in engine at the moment. Still waiting for the setup kit to arrive....