XRAY - Model racing cars

Hello, I am thinking how to get more steering in the middle of the corner, when apply trotthle.

When the car turn and roll, if I put more shims in the front roll center (the shims in the caster block), ¿the car get more turn in? If I do this in rear roll center I get more grip in the rear, correct?

Thanks.

if you want more steering in the corner you should give 0mm shims on front clamps and 1mm on rear
put rear shocks one more upright(it will give also more turn in)

and give 2mm shims under the steering block

reduce shims on ackermann


i had the same problem and it worked
but i also angled the front arms(front front down,front rear up- 0,5mm)
put in front gear diff
1mm on ackermann
and after this i had to reduce steering from 100% to 65%


hope it helps

Thank you Stanley.