XRAY - Model racing cars

Hi there,

Ive recently brought and raced my new car and it is great!

And noticed that the rear hubs are 0 degrees toe in..
and eveyone else that have brought the car have come with 2 degree toe in as standard?

Im i the only one?

or was it just a packing error...

Jack

Hi Jack,

Think you might be confused on how rear toe is added to the T3 because all T3's come with 0 deg rear uprights.
Rear toe is added by remove/adding shims at the bulkhead end of the suspension arm.
Default rear toe is 3degs.

Cheers
Andrew

oh ok i see! thanks

but mine didnt come with extra shims to do that, but i will get some

Jack

Hi Jack,

Thats strange for an Xray kit to be missing bits.
There should be 6 black 1.5mm shims in the kit. How many did your kit have?
4 go on the front and 2 go on the rear. There should be none on the front of the rear suspension blocks. This means you'll end up with the default 3 degrees of rear toe.
Hope that makes sense.

Cheers
Andrew

hi there

yes that does make sence thanks.

mine only came with four and i put them on the front.

But ive got some shims now and will put them on

Jack