XRAY - Model racing cars

Hi All

Just in the process of rebuilding my t3 2012, and setting up the front toe and sterring locks at the moment, just wondering what steering angle people use in degrees at full lock, with 1 degree of toe out my car has 24deg steering angle, i think this is too high, just wondering what the recommended amount would be.


Mark

I set my end points up so that the steering knuckles are just off the C-hubs.
You can always limit the end travel on your transmitter to reduce the actual steering angle.

I seem to recall Paul Lemieux talking about steering angles around 27deg for the inside wheel, and 21deg for the outside, but I could be wrong.

25 degrees

25 degrees, for the inside or the outside wheel?

Yes ok, thank you very much.