XRAY - Model racing cars

Hello everybody.

As you can see:
http://www.teamxray.com/teamxray/news/n ... %20Masters

Almost everybody of xray have a white shock springs. Are the yokomo springs? Does anyone know about that?

Regards.

I was using original 3.0/2.6 springs. But yes, the white springs were Yokomo springs.

I think it was about half the drivers using "white" springs.

Thank you David.

By chance, do you know is were pink and blue yokomo's springs?

Regards.

The Yokomo springs equals to our 2.6 front and 2.4 rear.

That is exaclty I was looking in the shock spring list.

Thank you Alexander! very good race al LRP TCM !!!

Actually they equa more l to our 2.4 and to the new progressive spring 2.2/2.6. We use 2.4 in the front and progressive spring in the rear. The advantage of the progressive spring is that it changes characteristics. When you enter the corner and car starts to roll, the spring feels like 2.2 which means that is soft and provides traction. In the middle of the corner when the car is rolling most, the spring becomes harder, 2.6, and that provides good cornering speed.

the springs are not released yet, but they will soon

part nuber: #308372

http://www.teamxray.com/teamxray/news/n ... %20Hagberg\'s%20winning%20T3%20from%20ETS&Xnet_Session=997be5e2fccad343de03b369081c3025

Will you be making any other progressive springs with a slightly higher rating, 2.4-2.8 and possibly 2.6-3.0?

That spring is only for rear, but for the front? Is good progressive springs in the front?
That spring is for modified? But for stock?

Ok, thank you very much Martin.