XRAY - Model racing cars

I am having issues with my T3 12 not completing a corner fast enough. It seems like it sits in the middle of the corner to long before completing the corner. The car comes into the corner really well.n any suggestions on what I can do to improve this?

at first if you can please give us your set up

17.5 blinks class

2.8 springs in front and position nr 3
2.6 in rear and 4 position
450(or 400) oil in all 4 shcoks with 3 holes opened
1.4 anti roll bar in front
1.3 anti roll bar in rear
6 front downstop,5 rear
0.5 toe out in front
1.5 camber in front and 2 in rear

if it wont work add to this:
1mm on the c hub and 1mm on the upper clamp in fornt(2 position)
4mm on the rear hub and 1mm on the rear clamps(1 position)

try 2000

but I havent seen your track,so its hard to help you
try this what i wrote before and then if it wont workn give photo or make in paint track layout

so this wil be good
if in chicanes there wont be enough speed put rear and also front shocks one position higher

put on middle