XRAY - Model racing cars

Managed to get a second hand xray diff for my sons 008 car.

Like an idiot did not think about anything else until I realised the car has 34 tooth pulleys. It does how ever have 20tooth centre pulleys.

I also have a spare 38 tooth pulley for the front.

Anyone know what belts I need to accomodate a 008 with 38tooth and 20tooth centre pulleys?

Anything else I need?

Thanks.

I dont believe its possible to run the 1.9FDR on the T2-008.
You either run 16t pulleys with 38t diffs or 20t pulleys with 34t diffs.
The T2-009 was the only car that allowed for this upgrade with the forward motor mount kit.

Nipped down to in the UK and was ready to go through a selection of belts.

Thought I would start with the obvious. T3 front and rear belts.

They fitted perfectly and did not have to put the belts on the tightest or weakest settings (room for adjustment) Was amazed

Job done.

Learning something new every day nice work.

To be honest I have ran this combination of pulley since the 008 first came out because of the early problem of the pinion catching the belt.

Originally I had to use 20T pulleys from an 05 and Front belt from another make and a rear belt from a different make again.

Its great know you can get all the parts from Xray though.

Still run my 008 at my local club with other current cars and still manage top 3.