Adjusting toe anterior

stevtec86 · **Joined:** Thu Nov 10, 2011 23:02:09 **Posts:** 41

Hi,
I have a question about adjusting the front toe of my rods of Q3 2012:

the instruction manual says to set the length of the rods to 65mm, and we know that in theory should be the convergence of 1 ° open right?
My question is: to close the convergence of half a degree, the length of the rods as I bring?
Example: 65mm = 1, open
64.50 mm = 0.5 ° open

Thanks for any answers

Martin Hudy · **Posted:** Tue Dec 20, 2011 16:04:35

yes, but better to check on the set up

stevtec86 · **Joined:** Thu Nov 10, 2011 23:02:09 **Posts:** 41

I know that the set-up system is much better, the problem is that my set-up system is broken, and in this moment I can not buy another .... then wondered if every half-millimeter corresponded to half can.
However, you confirm that shortening / lengthening the rod half a millimeter at a time, closes / opens the convergence of half a degree (about)?
Thank's for reply

Stanley Bąk · **Posted:** Sat Dec 24, 2011 18:54:37

stevtec86 · **Joined:** Thu Nov 10, 2011 23:02:09 **Posts:** 41

XRAY - Model racing cars

Adjusting toe anterior

Who is online