XRAY - Model racing cars

I am attempting to use a KO PROPO RSX servo. Once the servo is assembled I go to hook up the servo link and that assembles fine, but I get interference between the top deck and the servo link when steering. I think have assembled per the instructions but I am missing something. I have the turnbuckle with the flats on the side closest to the servo. Any help would be great!!

give us some photos

If it touch a little u can use sand paper to grind topdeck in that place , but if a little. If more mabye you mounted servo to high on alu stands to chassis

yes, please send the picture. I use same servo and have no problem

Here is a photo of the interference. THANKS!

As I thought, you have the two plastic steering arms upside down.

Look at the part of the manual I posted, they need to be the other way up.

Should look lke this;


Skiddins

Worked GREAT!!