T3 2012 multiflex

martin t · **Joined:** Sun Mar 06, 2011 22:49:20 **Posts:** 33

Just got my t3 2012 and can not see any multiflex settings is this correct? what are the flex settings if any

stevtec86 · **Joined:** Thu Nov 10, 2011 23:02:09 **Posts:** 41

I was also interested to know whether to adjust the flexibility of the frame are like those of version 2011 (by loosening the screws on Topdeck)
Confirm that the old is like Q3 2011 or is it different?
Thank you for any answers! |

Marek Gadomski · **Posted:** Mon Nov 28, 2011 22:37:18

i'm using 6 screws at beginning of competition and next i put all screws before Q2 or even qualifing (mid grip)

You will find time to put screws when car will loose speed (brake) when turning or just roll. :wink:

Skiddins · **Posted:** Mon Nov 28, 2011 23:16:19

The use of screws would be like the T3'11, you need to remove screws to gain a little flex.

Don't forget that the new top deck is far more flexible than the T3'11 version.

Skiddins

David_Ehrbar · **Posted:** Mon Nov 28, 2011 23:55:12

I always use at least the 4 screws in the front and 4 screws in the rear. This makes the car more robust against chassis-tweak. You do not gain much flex by removing some of these screws, especially the 4 at the front, but you lose a lot of robustness.

martin t · **Joined:** Sun Mar 06, 2011 22:49:20 **Posts:** 33

Thanks guys. I take it you can also use the 2 piece front suspension holders rather than the 1 piece one to gain more front flex and steering?

Skiddins · **Posted:** Tue Nov 29, 2011 12:26:50

stevtec86 · **Joined:** Thu Nov 10, 2011 23:02:09 **Posts:** 41

Skiddins · **Posted:** Wed Nov 30, 2011 01:04:55

stevtec86 · **Joined:** Thu Nov 10, 2011 23:02:09 **Posts:** 41

Skiddins · **Posted:** Wed Nov 30, 2011 12:10:19

stevtec86 · **Joined:** Thu Nov 10, 2011 23:02:09 **Posts:** 41

XRAY - Model racing cars

T3 2012 multiflex

Who is online