Joined: Sun Jun 08, 2008 00:10:24 Posts: 15 Location: uk
|
if you was to run the inner hole on the normal wishbone then yes the track would be to wide but but they are for running with a shorter wishbone you can drill the std wishbone to run them you need to move the hing pin hole in 6mm... i have been testing these for the last 2 months and the work really well car is more nimble and seems to be better on bumps and on landings i have run them back to back on 5 tracks dirt and astro now and been faster over a run on 4 out of the 5 and mached the times on the 5th well worth a try mate.
drilling the wishbones is easy but you need to make shore you get it right i made a jig to do it and help out any uk based drivers should they what to give them a go
|
|