| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Shock lenght for max droop https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=9713 |
Page 1 of 1 |
| Author: | raccat [ Wed Sep 30, 2009 21:13:17 ] |
| Post subject: | Shock lenght for max droop |
| Author: | m7rogers [ Thu Oct 01, 2009 04:15:23 ] |
| Post subject: | |
If you ran them that long the shaft would be hitting the shock cap I think . |
|
| Author: | Barkley Abernethy [ Thu Oct 01, 2009 05:30:01 ] |
| Post subject: | |
you can measure mine on sun ,shock length will always be slightly longer than max droop required so your arm is always sitting on the droop screw and never the shock end that way your shaft should never pull out of the plastic ,keep in mind your chassis will wear with the droop screw and will need checked if this is the case .......starting point 104f 114r down stop 106f 116 r shock lengths |
|
| Author: | raccat [ Thu Oct 01, 2009 19:14:56 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|