XRAY - Model racing cars

Josh's nats setup probably wouldn't be bad at all. The factory 808 setup is quite good though too. I just went back to it after a year of messing with all kinds of stuff on my car and it is really well balanced and quite stable.

jesses, You say your track is hard packed with alot of big jumps and kinda bumpy.

For a shock set-up with alot of big jumps I would go to the smallest hole piston (1.3) because you will get a better pack with the larger jumps. You say its kinda bumpy so you can get away with the smaller hole.

I would try the 1.3 hole pistons in all four shocks with(Xray) 600 in the front and 450 in the rear. If you loose to much steering with the 600 then drop it down to 500.

Hope this helps