XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Clutch Springs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=9448 |
Page 1 of 1 |
Author: | Cory Kerber [ Thu Jul 02, 2009 19:18:05 ] |
Post subject: | Clutch Springs |
I'm looking at getting some new heavy clutch springs for my XB8 and was wondering if the Odonnell springs would work rather than having to order Xray springs. http://www3.towerhobbies.com/cgi-bin/wt ... LXUPB5&P=7 |
Author: | Jason Branham [ Thu Jul 02, 2009 19:53:28 ] |
Post subject: | |
Cory, Are you going to try and run these with the Xray clutch set-up? (Fly wheel, clutch bell etc.) The best advise I can give about clutch systems is keep it all the same brand. If you are going to run Xray then keep it Xray and the same goes for all brands. These clutch systems are made and designed to work together with minimul stress on the parts. If you start mixing and matching then that is when you start experiencing problems. Hope this helps |
Author: | Cory Kerber [ Thu Jul 02, 2009 19:59:35 ] |
Post subject: | |
Yes, it will be used on the Xray stock clutch setup. I just figured rather than order the springs, that i could just get them from the local hobby shop. |
Author: | hoser954 [ Fri Jul 03, 2009 04:44:57 ] |
Post subject: | |
Author: | Ben Kennett [ Fri Jul 03, 2009 16:44:45 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |