| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB8ec... 808 style https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=9337 |
Page 1 of 1 |
| Author: | jhautz [ Wed Jun 10, 2009 20:19:09 ] |
| Post subject: | XB8ec... 808 style |
Just thought Id share a little experiment I did with my old EC buggy. I have been running my 808 with an electric setup, but some events will not allow electric and some are now finally having 2 classes electric and nitro. I wanted a buggy to run in the nitro events so I dug out my old EC buggy and set it up. Then used a few of the 808 spares I had in the pit box that I dont ever seem to need and gave it a little upgrade. Upgraded to the 808 big bore shock, added the 808 shock towers and now the geometry is very similar to the 808 shock setup. The holes are in almost the same place on the arms when holding the 808 arms next to the EC arms. Then with the 808 front tower on there I replaced the EC front upper wishbone style arm with the 808 style link upper arm. I figured if big bores and the upper arm link made such a huge difference in the handling of the XT8 it could probably help the EC buggy too. The thing handles like a new buggy. I still need to do some work dialing in the setup, but I took it out for some practice time on Sunday and it really surprised me how big of a improvment it was. Made the buggy much more stable and handled the rough track I usually race on beautifully. The thing jumps like a dream too. It springs off the jumps and flys super flat and very predictable. Almost better than my 808. Anyway, I just thought I'd share. If anyone has an older EC and wants to breath some new life into it I'd recomend trying this. I am really happy with the results of this so far. And it was basically free for me since I just raided the spares bin on my 808 to do it. LOL I never need these parts anyway. Sorry for the dirty buggy pictures. I haven't gotten around to cleaning it up after sunday test run and practice session. Showing front upper arm mod. Still havent taken off the old rear upper arm mount. I will now that I know I like this setup. Front tower and shocks. Rear shock tower and shocks. I had to drill a couple extra holes in the 808 rear tower to mount it to the EC rear chassis brace, but other than that this was all a drop in upgrade. |
|
| Author: | Rampokker [ Thu Jun 11, 2009 00:20:39 ] |
| Post subject: | |
| Author: | WheelNut [ Thu Jun 11, 2009 05:23:29 ] |
| Post subject: | |
| Author: | jhautz [ Thu Jun 11, 2009 06:15:38 ] |
| Post subject: | |
| Author: | Cory Kerber [ Thu Jun 11, 2009 07:02:59 ] |
| Post subject: | |
| Author: | jhautz [ Fri Jun 12, 2009 18:39:18 ] |
| Post subject: | |
| Author: | Cory Kerber [ Sun Jun 14, 2009 22:22:46 ] |
| Post subject: | |
| Author: | jhautz [ Mon Jun 15, 2009 05:48:27 ] |
| Post subject: | |
| Author: | guy02 [ Sat Jul 11, 2009 22:09:40 ] |
| Post subject: | |
where can I find one ?? |
|
| Author: | guy02 [ Wed Aug 05, 2009 19:45:54 ] |
| Post subject: | |
where can I find EC rear arms on-line??? nothing anymore at amain, carolinas..... |
|
| Author: | WheelNut [ Thu Aug 06, 2009 10:01:20 ] |
| Post subject: | |
Xray Xshop? Or you could Email RC America and ask them, they should be able to tell you where to get them. |
|
| Author: | guy02 [ Fri Oct 16, 2009 17:05:33 ] |
| Post subject: | |
I did this mod to a xb TQ going to try mounting the 808 rear arms one day but the front is ok like this.. original xb shocks with RMV progressive springs extreme towers |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|