if you do, let me know cuz I have that same starter box and would be very interested.....
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XB8 and XT8 starter box options https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=9225 |
Page 1 of 1 |
| Author: | madbrad [ Fri May 15, 2009 17:16:52 ] |
| Post subject: | XB8 and XT8 starter box options |
| Author: | madbrad [ Fri May 15, 2009 20:32:38 ] |
| Post subject: | |
| Author: | XT8Truggy [ Fri May 15, 2009 21:09:22 ] |
| Post subject: | |
| Author: | madbrad [ Fri May 15, 2009 22:53:25 ] |
| Post subject: | |
| Author: | xlgraphicspro [ Mon May 18, 2009 19:33:46 ] |
| Post subject: | |
I'm using the ofna truggy starter box. I machines an aluminum bracket that sits on either side of the starter wheel, and hooks onto the chassis by going up into the fly wheel hole on the chassis. I had to trim 1-2 mm of rubber off my flywheel to make it work. But I must say I impressed myself by how well it does work. perfect fit on my 808, and a bit of wiggle room on the xt8, but I don't have to finess it. I just set it on push down, and it fires right up. I'll post pics as soon as I get home tonight. I should get my buddy to machine up a couple sets. |
|
| Author: | matt_xb8r [ Mon May 18, 2009 23:01:02 ] |
| Post subject: | |
if you do, let me know cuz I have that same starter box and would be very interested.....
|
|
| Author: | gasman007 [ Thu May 21, 2009 15:10:26 ] |
| Post subject: | |
| Author: | djballen [ Fri May 22, 2009 04:54:00 ] |
| Post subject: | |
http://www.tonysscrews.com/product.sc?c ... ductId=400 these will work |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|