XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Wheelbase and set up sheet clarification?? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=9010 |
Page 1 of 1 |
Author: | Ronaldo808 [ Wed Apr 01, 2009 20:09:49 ] |
Post subject: | Wheelbase and set up sheet clarification?? |
could someone explain what is meant on the wheelbase section on the set up sheet. im confused because it only has a check for in front and none behind.. also is maximum wheelbase too extreme what would it give me ?? thanks |
Author: | RC America [ Wed Apr 01, 2009 20:27:43 ] |
Post subject: | |
The text under those selection boxes describes the question you are asking about. For the front arms, the check box shows how many shims are positioned behind the arm. Any remaining slop should be filled with the shims at the front of the arm. The reverse it true for the rear suspension. The check box indicates how many shims are positioned at the front of the arm. You will always want to shims the arms so there is no slop, so it is only necessary to indicate the number of shims on one side of the arm to indicate position. Hopefully that helps! Bryan RC America |
Author: | Ronaldo808 [ Wed Apr 01, 2009 20:48:39 ] |
Post subject: | |
Bryan thanks for the explanation i get it now... So is Max Wheelbase too extreme?? what would you loose or gain from this thanks |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |