XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XB8 top plate https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8998 |
Page 1 of 1 |
Author: | channah [ Mon Mar 30, 2009 18:24:41 ] |
Post subject: | XB8 top plate |
Author: | rallyraid [ Mon Mar 30, 2009 18:33:58 ] |
Post subject: | |
are you sure that you have the rest of the servo mounts fitted correctly |
Author: | channah [ Mon Mar 30, 2009 18:57:20 ] |
Post subject: | |
Yeah. The graphite plate fits fine? |
Author: | Bren Ralls [ Mon Mar 30, 2009 20:25:42 ] |
Post subject: | |
Author: | channah [ Mon Mar 30, 2009 20:45:21 ] |
Post subject: | |
Author: | lauri [ Mon Mar 30, 2009 20:52:33 ] |
Post subject: | |
As you can see it includes new radio plate - 356116 Alu Radio Plate 7075 T6 (3mm) - V2. I think the difference comes from different chassis plate. Servo mount and radio box should be the same. Someone could confirm this... Original XB8 has . |
Author: | matt_xb8r [ Wed Apr 01, 2009 01:13:08 ] |
Post subject: | |
the radio box and the servo mounts should be the same but the radio plate for the EC won't fit a TQ, R, or original XB8 because they changed the placement of the motor and center diff by about 2mm. |
Author: | Rocco Margiotta [ Wed Apr 01, 2009 03:08:52 ] |
Post subject: | |
Yeup, the 356110 has the same dimensions as the 356115 while the 356116 fits the EC/XT8. A little tid-bit of info, the 356110 'V2' is what is going on the truggy. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |