| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 41t ring gear https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8993 |
Page 1 of 2 |
| Author: | daniel366940 [ Sat Mar 28, 2009 22:00:25 ] |
| Post subject: | 41t ring gear |
| Author: | rallyraid [ Sat Mar 28, 2009 22:32:43 ] |
| Post subject: | |
| Author: | Bren Ralls [ Mon Mar 30, 2009 08:04:40 ] |
| Post subject: | |
| Author: | daniel366940 [ Mon Mar 30, 2009 19:26:03 ] |
| Post subject: | |
does that still apply if you are already running the middle hole ?? |
|
| Author: | Bren Ralls [ Mon Mar 30, 2009 20:21:04 ] |
| Post subject: | |
| Author: | WheelNut [ Tue Mar 31, 2009 07:50:19 ] |
| Post subject: | |
| Author: | WhizZ [ Tue Mar 31, 2009 22:12:56 ] |
| Post subject: | |
a noob question we have to put the 41T in front and another one on the rear? or we can use diferent sizes? |
|
| Author: | rallyraid [ Tue Mar 31, 2009 22:14:13 ] |
| Post subject: | |
jst the front. its a tuning aid not a must do |
|
| Author: | Svanur [ Wed Apr 01, 2009 14:03:29 ] |
| Post subject: | |
| Author: | Jason Branham [ Wed Apr 01, 2009 20:43:19 ] |
| Post subject: | |
Also I will add that the overdrive gear will help on rougher tracks to keep the rear of the car on the ground better because the front is pulling harder. This was a tunning aid that I used on the EC with the overdrive gear. I can't wait to get one myself... 
|
|
| Author: | HulkRay [ Wed Apr 01, 2009 23:45:09 ] |
| Post subject: | |
| Author: | Butcher [ Thu Apr 02, 2009 03:08:14 ] |
| Post subject: | |
I saw a picture somewhere with the 41 gears & the caption read for active & standard diff.What would happen when you combine the 41 & active diff? sounds like a whole lotta fun to me. |
|
| Author: | Bren Ralls [ Thu Apr 02, 2009 08:08:24 ] |
| Post subject: | |
| Author: | XT8Truggy [ Thu Apr 02, 2009 09:52:02 ] |
| Post subject: | |
| Author: | guy02 [ Mon Apr 06, 2009 10:05:28 ] |
| Post subject: | |
can 808 43 or 41t gears be used with EC bulkheads ?? or 12 t conical gears... |
|
| Author: | Andrew Webber [ Mon Apr 06, 2009 13:03:01 ] |
| Post subject: | |
Dont think so, be a different pitch. The 41t front gear works awesome! I'll never take it out 
|
|
| Author: | guy02 [ Mon Apr 06, 2009 13:19:58 ] |
| Post subject: | |
ok I have a ec and a 44T main gear if I mount truggy 10/41T fr.and 10/43T rr. in the bulkheads |
|
| Author: | guy02 [ Tue Apr 07, 2009 11:30:11 ] |
| Post subject: | |
| Author: | Kane-o [ Tue Apr 07, 2009 22:05:17 ] |
| Post subject: | |
| Author: | midnightexpress1 [ Thu Apr 09, 2009 13:41:00 ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|