| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| battery dimensions https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8967 |
Page 1 of 1 |
| Author: | alkal [ Sat Mar 21, 2009 08:49:02 ] |
| Post subject: | battery dimensions |
Hi , do you know the inner dimensions for the battery chamber in the 808, what is the max bat size I can use? does anybody tried this one FTX2561 - FTX VOLTZ 7.4V 2050MAH STRAIGHT LIPO RECEIVER PACK http://www.apexmodels.com/gbu0-prodshow/FTX2561.html thank you |
|
| Author: | Ry @ JE Spares [ Sat Mar 21, 2009 12:42:13 ] |
| Post subject: | |
I personally run an LRP 2300mAh LiPo Hump in the RX compartment, then put the Losi regulator and a Futaba RX in the long compartment. Fits very well. |
|
| Author: | lauri [ Sat Mar 21, 2009 19:59:54 ] |
| Post subject: | |
If the Futaba RX is 2.4GHz FASST then I would try to keep it as far away from the motor as possible! It will shut off if the temp gets ~60Celsius. Because the radio box is next to the motor it is very easo to reach high temps 
Radio box dimensions should be about (I think measured by Rocco  ):
Battery compartment - 20mm x 87mm x 32mm Receiver compartment (usable) - 65mm x 40m x 24mm |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|