| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Brake setup? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8617 |
Page 1 of 1 |
| Author: | low10s [ Sun Jan 04, 2009 06:50:35 ] |
| Post subject: | Brake setup? |
| Author: | Wylie A [ Mon Jan 05, 2009 18:09:40 ] |
| Post subject: | Re: Brake setup? |
| Author: | Rocco Margiotta [ Mon Jan 05, 2009 18:30:21 ] |
| Post subject: | |
Here's a pic of my linkage. I like running the carbon brakes on straight metal pads. I set them up just like buggy (depending on the track) 90% of the, the rear is setup to nearly lock and I set the front up to barely not lock-up. |
|
| Author: | Jason Branham [ Mon Jan 05, 2009 21:50:11 ] |
| Post subject: | |
| Author: | Leon McIntosh [ Mon Jan 05, 2009 23:08:31 ] |
| Post subject: | |
| Author: | Leon McIntosh [ Mon Jan 05, 2009 23:11:21 ] |
| Post subject: | |
| Author: | low10s [ Tue Jan 06, 2009 00:07:43 ] |
| Post subject: | |
| Author: | Butcher [ Tue Jan 06, 2009 04:17:00 ] |
| Post subject: | |
How about too much front brake causing a flip or nose wheelie when track gets beatup with braking bumps at the end of the straight. Thats how I set my brakes when I hit a new track. If the back end gets light in morning practice I back off 3/4 to a full turn before the heats & if it blows out in the heats maybe 1/2 turn after round one. Not a lot of my group are heavy brake users though,were mostly sportsman(inarticulate finger) guys. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|