| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Do you all grease the Crown gear on the diffs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8483 |
Page 1 of 1 |
| Author: | Ronaldo808 [ Fri Nov 21, 2008 23:08:56 ] |
| Post subject: | Do you all grease the Crown gear on the diffs |
| Author: | MALLET [ Fri Nov 21, 2008 23:37:08 ] |
| Post subject: | |
| Author: | Ronaldo808 [ Sat Nov 22, 2008 07:05:31 ] |
| Post subject: | |
ok thanks i may pop out for some, does it last a few meetings or do i have to open em up and keep applying it? also is there anyone who doesnt use anything? |
|
| Author: | Barkley Abernethy [ Sat Nov 22, 2008 10:39:56 ] |
| Post subject: | |
| Author: | anf0 [ Sat Nov 22, 2008 13:02:28 ] |
| Post subject: | |
| Author: | Ronaldo808 [ Sat Nov 22, 2008 13:23:42 ] |
| Post subject: | |
| Author: | MALLET [ Sat Nov 22, 2008 14:19:24 ] |
| Post subject: | |
Ronaldo, It runs a lot smoother with the lithium grease and the lithium grease take a hell of a lot of heat and pressure. Take the seals off of your wheel bearings carefully and fill with the lithium grease as well. They'll last for ages ask Daz.fx. Tim |
|
| Author: | Ronaldo808 [ Sat Nov 22, 2008 15:59:06 ] |
| Post subject: | |
| Author: | Bazza [ Sun Nov 23, 2008 20:54:33 ] |
| Post subject: | |
| Author: | Leon McIntosh [ Sun Nov 23, 2008 23:07:38 ] |
| Post subject: | |
| Author: | spork01 [ Mon Nov 24, 2008 06:00:54 ] |
| Post subject: | |
| Author: | Bazza [ Mon Nov 24, 2008 13:36:05 ] |
| Post subject: | |
| Author: | Barkley Abernethy [ Mon Nov 24, 2008 19:49:00 ] |
| Post subject: | |
| Author: | jhautz [ Mon Nov 24, 2008 21:39:11 ] |
| Post subject: | |
| Author: | Keith [ Tue Nov 25, 2008 13:25:05 ] |
| Post subject: | |
| Author: | Ronaldo808 [ Tue Nov 25, 2008 15:10:29 ] |
| Post subject: | |
is this the gear lads |
|
| Author: | Bazza [ Tue Nov 25, 2008 15:39:21 ] |
| Post subject: | |
I'd say so mate. The LM grease I use was ?3.50 for a 500g tub ~ it says on the back: LM Grease High Melting Point - A multipurpose top quality lithium based grease with outstanding high temp stability, suitable for most automobile applications inc wheel bearings, hubs, CV/universal joints, chassis and general greasing. I've had this tub for about 5 years and it has a quarter of a tub left, I use it on my model cars and 1:1 car |
|
| Author: | Steve Walters [ Tue Nov 25, 2008 18:32:20 ] |
| Post subject: | |
I picked up a can of "Pennzoil Premium Bearing Grease" at my local Auto parts store for $5.95 for 14 oz. a couple years ago. Still have 1/2 a can now. This grease has work great for all purposes. I use it to repack my bearings after there cleaning, grease the Pinion/Bevel gear, and seal the bottom of the diff case to the chassis with it. I totally cleaned out a old bottle of Diff oil and use that to apply it. This grease looks, feels and smells the same as XRAY's Premium grease. I don't think its exactly the same, but very close, and has worked great for myself and a few others I race with. http://www.pennzoil.com/products/grease ... 7_red.html |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|