XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
suspention help https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8473 |
Page 1 of 1 |
Author: | Edwin Pibal [ Mon Nov 17, 2008 22:27:04 ] |
Post subject: | suspention help |
Author: | MARK TARRIER [ Tue Nov 18, 2008 00:06:26 ] |
Post subject: | loose rear end |
Author: | Jason Branham [ Tue Nov 18, 2008 00:47:40 ] |
Post subject: | |
Author: | Edwin Pibal [ Tue Nov 18, 2008 00:53:30 ] |
Post subject: | |
Author: | macca [ Tue Nov 18, 2008 01:35:09 ] |
Post subject: | |
Author: | Edwin Pibal [ Tue Nov 18, 2008 01:55:13 ] |
Post subject: | |
Author: | MARK TARRIER [ Tue Nov 18, 2008 15:23:22 ] |
Post subject: | |
try minus 3 deg camber on the rear, u could also try the silver springs, the blue/grey are a bit hard and i dont see a lot of people running them here in the uk where the tracks are bumpy they tend to run grey or silver? i sometimes run the rear brace with no screw through the shock mount, i dont know if anyone has done this but it works really well and i find it has helped me on slippery tracks! i have had no troubles running this but i do run the metal rings beetween the pinion bearings? these are just a few things that have helped me and i know they wont be for everyone! |
Author: | sturla [ Tue Nov 18, 2008 15:52:58 ] |
Post subject: | |
You could also try hole number 3 in rear roll center. The biggest difference will probably be 3-4k in rear diff, but you will loose a little off power steering. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |