XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Xray Active Diffs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8346 |
Page 1 of 4 |
Author: | Keyser-Soze [ Fri Oct 10, 2008 17:11:09 ] |
Post subject: | Xray Active Diffs |
Author: | gddevey1012 [ Fri Oct 10, 2008 18:20:14 ] |
Post subject: | |
Author: | Keyser-Soze [ Fri Oct 10, 2008 19:46:20 ] |
Post subject: | |
Author: | Jorg van Leuken [ Fri Oct 10, 2008 22:18:52 ] |
Post subject: | |
Author: | Steve Walters [ Sat Oct 11, 2008 03:42:59 ] |
Post subject: | |
Author: | Keyser-Soze [ Sat Oct 11, 2008 15:00:09 ] |
Post subject: | |
Author: | daz.fx [ Sat Oct 11, 2008 16:39:17 ] |
Post subject: | |
Author: | Rocco Margiotta [ Sat Oct 11, 2008 18:30:44 ] |
Post subject: | |
Author: | Oli [ Sat Oct 11, 2008 19:04:16 ] |
Post subject: | |
Author: | Rocco Margiotta [ Sat Oct 11, 2008 19:57:40 ] |
Post subject: | |
Author: | Craige Lewis [ Sun Oct 12, 2008 12:02:59 ] |
Post subject: | |
Guy i ran the XT8 Active diff in my 808 this week end it fits with no problem i did have to shim it. And you also have to machine the out drives down to the same length as the standard out drives cause when it at full up travel the drive shafts get court in the grove in the out drive and you will also have the machine a taper on the inside off the out drive to allow the front suspention full travel! Hope this clears it up for you guys! Craige |
Author: | GregM [ Sun Oct 12, 2008 20:25:21 ] |
Post subject: | |
Author: | daz.fx [ Sun Oct 12, 2008 22:39:38 ] |
Post subject: | |
Author: | Keyser-Soze [ Sun Oct 12, 2008 22:43:14 ] |
Post subject: | |
Well if you want Active Diffs for the 808,you can buy them here , its a store that has them and they're for the 808,i've seen them, it says on the paper 808 Active Diff. This store is very competitive in prices,has lots of material for Xray and they're very responsable and honest persons! |
Author: | Butcher [ Mon Oct 13, 2008 01:17:17 ] |
Post subject: | |
Author: | Rocco Margiotta [ Mon Oct 13, 2008 02:18:08 ] |
Post subject: | |
Author: | brano [ Mon Oct 13, 2008 07:48:30 ] |
Post subject: | |
Author: | daniel366940 [ Mon Oct 13, 2008 18:50:05 ] |
Post subject: | |
Author: | RyanLopez [ Mon Oct 13, 2008 19:18:02 ] |
Post subject: | |
Author: | jhautz [ Mon Oct 13, 2008 22:48:46 ] |
Post subject: | |
Page 1 of 4 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |