| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Titan or stainless screws for 808 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8282 |
Page 1 of 2 |
| Author: | walste [ Thu Sep 25, 2008 21:37:11 ] |
| Post subject: | Titan or stainless screws for 808 |
Is there any kit with all the screws on the XB808 in titan or stainless ? |
|
| Author: | low10s [ Fri Sep 26, 2008 13:07:42 ] |
| Post subject: | |
| Author: | Keyser-Soze [ Fri Sep 26, 2008 14:50:08 ] |
| Post subject: | |
| Author: | walste [ Fri Sep 26, 2008 16:00:04 ] |
| Post subject: | |
| Author: | Keyser-Soze [ Fri Sep 26, 2008 16:34:00 ] |
| Post subject: | |
Me too,have the same problem,i can't understand why,maybe bad quality about the screws,they get all rusty,not only the screws,all the aluminium parts that are exposed,get all rusty,it's quite weird and sad! I'm always sanding mine's,but after 1 day,they are all rusty,it's so stupid! Tony screws link: |
|
| Author: | Robin Frischkopf [ Fri Sep 26, 2008 17:20:03 ] |
| Post subject: | |
Aluminium does not rust. |
|
| Author: | walste [ Fri Sep 26, 2008 17:26:30 ] |
| Post subject: | |
No i know, i dont have problem with the alu. but every screw |
|
| Author: | motorboyduc [ Fri Sep 26, 2008 20:46:27 ] |
| Post subject: | |
mugen has titanium screw just take the right size.... |
|
| Author: | walste [ Fri Sep 26, 2008 20:53:08 ] |
| Post subject: | |
I found a kit of stainless screws for the 808 now here in sweden. i will try them out. |
|
| Author: | Keyser-Soze [ Sat Sep 27, 2008 00:21:53 ] |
| Post subject: | |
Robin hi,i have my turnbuckles with some rust,and ALL the screws with rust! |
|
| Author: | Tricksy [ Sat Sep 27, 2008 05:52:06 ] |
| Post subject: | |
| Author: | walste [ Sat Sep 27, 2008 08:13:14 ] |
| Post subject: | |
| Author: | motorboyduc [ Sat Sep 27, 2008 10:40:05 ] |
| Post subject: | |
| Author: | Tank time [ Sat Sep 27, 2008 10:49:49 ] |
| Post subject: | |
| Author: | lauri [ Sat Sep 27, 2008 12:38:56 ] |
| Post subject: | |
| Author: | walste [ Sat Sep 27, 2008 19:01:59 ] |
| Post subject: | |
| Author: | Darryl [ Wed Oct 01, 2008 14:11:55 ] |
| Post subject: | |
I have tried Stainless screws in my previous cars and have found that they strip far to easily. I have decided to stick with the standard screws on my 808, as they perfectly adiquit for the job. But they do serve me very well in one other important aspect, the levels of rust indicate the lack of maintenance carried out. Therefore: Good Overall Car Maintenance = Very Little or No Rust. |
|
| Author: | Keyser-Soze [ Wed Oct 01, 2008 21:54:04 ] |
| Post subject: | |
| Author: | sixshooter_45 [ Thu Oct 02, 2008 04:45:39 ] |
| Post subject: | Try these, high quality screws |
|
|
|
| Author: | jhautz [ Thu Oct 02, 2008 05:26:49 ] |
| Post subject: | |
Well I noticed something wierd after reading this thread and looking at my bugies. I have two 808s. One is brushless converted and the other is running a conventional nitro setup. I pretty much have only run the electric one this summer and I see no rust on the screws at all. The nitro has hardly been touched and has spent most of the summer put away in the RC closet or in the pit bag at the track. Well the one that has gotten alot of use has no detectable rust on the screws, but the one that hasnt seen much action is showing rust on the screws, and its actually a month newer than the other. Not sure if there is anything to it, but the lack of use seems to take its toll as far as rust on the screws. So you guys with the rusty screws need to get your buggies out of the closet more. lol 
|
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|