XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
XB808 Brake pads https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8279 |
Page 1 of 1 |
Author: | gio2174 [ Thu Sep 25, 2008 09:35:32 ] |
Post subject: | XB808 Brake pads |
Hi I have an unusual problem with the rear brake on my 808. The metal pads that hold the disc when you brake, seem to bend for some reason. I have tried it with a few sets and it ends up the same. They bow out towards the rear of the car. The brakes are not dragging. I tried it with the kit brakes and then craddock brakes with the metal plates only. They all end up bending. Can you help? |
Author: | sturla [ Thu Sep 25, 2008 09:39:30 ] |
Post subject: | |
Hi You can buy the option steel brake pad that`s hardened, don`t think you will have that problem with those 35 4121 STEEL BRAKE PAD - LASER CUT - HARDENED (4) |
Author: | nvanderpool [ Thu Sep 25, 2008 15:57:03 ] |
Post subject: | Double up |
Buy the hardened steel brake pads and then double up the outside pads with the old pads. Problem solved and you will have a much smoother brake action. Even the hardened ones will bend if you use a strong servo and a phenolic brake disc (they are thicker but much more consistent) |
Author: | UndergroundRC [ Thu Sep 25, 2008 22:28:25 ] |
Post subject: | |
Author: | Butcher [ Fri Sep 26, 2008 03:22:06 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue Sep 30, 2008 21:02:03 ] |
Post subject: | |
Author: | UndergroundRC [ Tue Sep 30, 2008 21:15:41 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |