XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
808 Design problem- Diff pinion gear bearing stress https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8192 |
Page 1 of 6 |
Author: | WheelNut [ Mon Sep 01, 2008 20:07:50 ] |
Post subject: | 808 Design problem- Diff pinion gear bearing stress |
Author: | MALLET [ Mon Sep 01, 2008 20:15:13 ] |
Post subject: | |
Author: | daveg [ Mon Sep 01, 2008 20:28:47 ] |
Post subject: | |
Author: | leebunker [ Mon Sep 01, 2008 21:39:12 ] |
Post subject: | |
Author: | Tank time [ Mon Sep 01, 2008 23:37:56 ] |
Post subject: | |
Author: | daz.fx [ Mon Sep 01, 2008 23:42:30 ] |
Post subject: | |
Author: | zieluch [ Tue Sep 02, 2008 13:47:33 ] |
Post subject: | |
I broke 2 set ad now change each liter new set frm avid. This is big xray problem, please dont say "it doesnt happend" |
Author: | Rocco Margiotta [ Tue Sep 02, 2008 18:45:44 ] |
Post subject: | |
The only guys that I see breaking bearings/bulkheads locally are the guys that don't let off the throttle and nose into the ground almost every jump. I've seen a factory driver of another brand, to remain nameless, sheer the front end off of his car when he nosed into the ground on a big jump. 8 lbs. going 20-30mph is never good when you nose into the Earth, learning to jump is just as important as learning not to hit the walls/pipe. |
Author: | InfernoRob [ Wed Sep 03, 2008 11:04:07 ] |
Post subject: | |
Author: | auto2 [ Wed Sep 03, 2008 17:52:26 ] |
Post subject: | |
has anyone with this problem checked to see if their chassis is bent? |
Author: | Bife [ Wed Sep 03, 2008 18:27:47 ] |
Post subject: | |
Author: | Richmond [ Wed Sep 03, 2008 18:53:19 ] |
Post subject: | |
Author: | WheelNut [ Wed Sep 03, 2008 19:59:00 ] |
Post subject: | |
Author: | Rocco Margiotta [ Wed Sep 03, 2008 20:51:57 ] |
Post subject: | |
Author: | Matt Le French [ Wed Sep 03, 2008 21:06:27 ] |
Post subject: | |
Author: | daveg [ Wed Sep 03, 2008 21:07:17 ] |
Post subject: | |
Author: | Rocco Margiotta [ Wed Sep 03, 2008 21:34:03 ] |
Post subject: | |
Author: | Mader [ Wed Sep 03, 2008 23:58:49 ] |
Post subject: | |
Author: | Richmond [ Thu Sep 04, 2008 02:16:13 ] |
Post subject: | |
Author: | Tank time [ Thu Sep 04, 2008 06:19:16 ] |
Post subject: | |
Page 1 of 6 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |