| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Bearing sizes https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=8186 |
Page 1 of 1 |
| Author: | Craige Lewis [ Sat Aug 30, 2008 10:25:08 ] |
| Post subject: | Bearing sizes |
| Author: | Craige Lewis [ Mon Sep 01, 2008 11:47:56 ] |
| Post subject: | |
Any one???? hello.... Craige |
|
| Author: | Tank time [ Mon Sep 01, 2008 11:56:51 ] |
| Post subject: | |
Craige, PM Rocco he uses these motors and sells them too. It's gonna be my next motor too, but maybe the 8 port as a friend of mine runs an RB C6 on road engine and its smooth on the bottom and revs to eternity like an 8 port motor and really suits the light weight Bob. Let us know when you find out. |
|
| Author: | Craige Lewis [ Mon Sep 01, 2008 12:46:37 ] |
| Post subject: | |
Cool... i will do that i ran the 5 port on the week end and felt nice! Craige |
|
| Author: | Keith [ Mon Sep 01, 2008 15:28:12 ] |
| Post subject: | |
14x25.4x6 for the rear, 7x19x6 for the front. |
|
| Author: | Craige Lewis [ Tue Sep 02, 2008 11:54:04 ] |
| Post subject: | |
Keith....thank you your a legend dude... Craige |
|
| Author: | Rocco Margiotta [ Tue Sep 02, 2008 18:38:37 ] |
| Post subject: | |
Craige, I would stick with stock, steel bearings especially for off-road... Ceramics are very fragile and wear out very quickly, I'm not a big fan of them. The only way they last is in an on-road motor, but even there, they don't last as long as a high grade steel bearing. I did get your PM but I was at a 3 day race this weekend, sorry! |
|
| Author: | Craige Lewis [ Wed Sep 03, 2008 10:49:52 ] |
| Post subject: | |
| Author: | Chris Russell [ Fri Sep 05, 2008 03:19:27 ] |
| Post subject: | |
| Author: | Craige Lewis [ Mon Sep 08, 2008 06:36:26 ] |
| Post subject: | |
| Author: | Chris Russell [ Mon Sep 08, 2008 15:51:05 ] |
| Post subject: | |
| Author: | Craige Lewis [ Tue Sep 09, 2008 12:06:43 ] |
| Post subject: | |
| Author: | BGMock [ Tue Sep 09, 2008 13:03:09 ] |
| Post subject: | |
| Author: | Chris Russell [ Tue Sep 09, 2008 16:19:28 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|