XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
What have you broken so far? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=80 |
Page 1 of 3 |
Author: | grahama89 [ Tue Sep 14, 2004 09:48:18 ] |
Post subject: | What have you broken so far? |
In the interest of building up a list for peoples pit boxes. What have you broken so far? |
Author: | glennsrc [ Tue Sep 14, 2004 12:37:51 ] |
Post subject: | |
Author: | grahama89 [ Tue Sep 14, 2004 23:39:30 ] |
Post subject: | Ref |
Author: | Neo-Buggy Phil [ Wed Sep 15, 2004 09:04:54 ] |
Post subject: | |
Author: | grahama89 [ Wed Sep 15, 2004 09:41:33 ] |
Post subject: | clutch pin prob |
Author: | alice [ Wed Sep 15, 2004 13:17:11 ] |
Post subject: | |
Author: | nitrojim [ Thu Sep 16, 2004 04:29:23 ] |
Post subject: | |
Author: | ed gaines [ Thu Sep 16, 2004 05:32:45 ] |
Post subject: | |
Author: | BuLLdoGG [ Thu Sep 16, 2004 18:30:54 ] |
Post subject: | |
Not the end of the world, but I tore one shock boot. With all the spares in this kit, this is the one thing I could have used and isn't spare. |
Author: | grahama89 [ Thu Sep 23, 2004 00:01:07 ] |
Post subject: | shocks |
There's another thread on the shock seals slipping past the G clip. Maybe you would like to view that too. |
Author: | grahama89 [ Thu Sep 23, 2004 14:44:27 ] |
Post subject: | Broken |
OK I've just found a rear upright and a front lower A-arm knackered. This plastic is too brittle. |
Author: | imaxx21 [ Fri Sep 24, 2004 07:55:24 ] |
Post subject: | |
Author: | yipikaie [ Mon Oct 04, 2004 08:43:01 ] |
Post subject: | |
Author: | Booyah [ Mon Oct 04, 2004 09:06:04 ] |
Post subject: | |
Author: | yipikaie [ Mon Oct 04, 2004 11:58:21 ] |
Post subject: | |
Author: | grahama89 [ Sun Oct 10, 2004 01:01:20 ] |
Post subject: | |
Author: | fraggle768 [ Wed Oct 13, 2004 10:03:42 ] |
Post subject: | |
I broke the graphite upper plate (351340). The counter sunk screw from the torque rod went partly through the graphite plate. See image (hope it works) I had no big crash just some flips. IMO the chassis has too much flex, so this screw is a weak point. Added some more details |
Author: | Max power [ Tue Oct 19, 2004 21:33:51 ] |
Post subject: | |
Author: | J.W [ Tue Oct 19, 2004 22:34:29 ] |
Post subject: | |
Author: | The Machine [ Tue Oct 19, 2004 22:38:44 ] |
Post subject: | |
Page 1 of 3 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |