EXTREMELY IMPORTANT INFORMATION
Guys, please tell and explain to everyone this very VERY important information.
When you work on your off-road/truggy set-up and use the , you need to make sure following things:
1.) Have the car placed on flat area such as the .
2.) When you have the set-up system mounted on the car and you want to meassure camber or toe, you NEED to insert droop gauge such as #107717 HUDY Off-road Gauges under the chassis, push on the car to make sure it seats on the gauges and just then read the scale on the set-up system.
This is very important. If you will not have the seating on the droop gauges, what you read on the set-up system will be always different. At the last Euros I had few customers who claimed the set-up system did not show the proper values and this is just the result of not doing the set-up procedure properly as described above.
This information is clearly described in the HUDY Off-road Set-up Book which is included now to every set-up system as well included in every 808 kit and you can download a FREE copy here: http://www.teamxray.com/teamxray/showfi ... le_id=4461
Please inform everybody you know.
|