| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Power tool to work on R/C cars. https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7917 |
Page 1 of 1 |
| Author: | HulkRay [ Sat Jun 28, 2008 13:24:29 ] |
| Post subject: | Power tool to work on R/C cars. |
| Author: | Tank time [ Sat Jun 28, 2008 15:03:57 ] |
| Post subject: | |
| Author: | Tricksy [ Sat Jun 28, 2008 15:50:04 ] |
| Post subject: | |
im using a: Bosch IXO Cordless Screwdriver 3.6V withs Ofna attachments it doesnt have torque settings but works perfectly just as im getting to the end of the thread either slow down or slightly blip it and the slower speed dont allow it to turn so you can tell you its done. takes a bit of practise to be fair but i have it down to a t now. 
|
|
| Author: | daveg [ Sat Jun 28, 2008 16:03:50 ] |
| Post subject: | |
got any links for those long drivers? dave |
|
| Author: | lauri [ Sat Jun 28, 2008 16:05:42 ] |
| Post subject: | |
Many guys are using the same Bosch or one similar that's brand I can't recall. It is really small and light and does the job. You can always tighten the screws manually when they are screwed in. Use Torx head screws and you won't strip them ever. Haven't yet stripped one. It feels so nice compared to hex heads, that you will strip sooner or later even with highest quality tools. |
|
| Author: | Steve Walters [ Sat Jun 28, 2008 18:11:14 ] |
| Post subject: | |
"Hitachi DB3DL" with the ONFA long Bits. I like the Hitachi for its two speed control, and its 21 point clutch settings. At the lower settings it won't strip out the plastic. There are many of these a the track around Ca, and everyone who I've talk to love there's too. Here is a good deal for one. Lowe's typically sells them for 89.99. DeWalt has come out with one very similar too. Haven't see one person, just pics. http://cgi.ebay.com/Hitachi-3-6V-Cordle ... dZViewItem |
|
| Author: | Tricksy [ Sat Jun 28, 2008 19:05:58 ] |
| Post subject: | |
| Author: | Tank time [ Sun Jun 29, 2008 06:16:34 ] |
| Post subject: | |
| Author: | Leon McIntosh [ Sun Jun 29, 2008 20:07:59 ] |
| Post subject: | |
i dont know what its called but black and decker sells one with a clutcht for only $20 and it looks like the green hitachi above. its freakin awesome and would suggest any other way. EDS makes tips and OFNA makes them as well. |
|
| Author: | Steve Walters [ Sun Jun 29, 2008 21:43:17 ] |
| Post subject: | |
| Author: | jhautz [ Mon Jun 30, 2008 07:25:54 ] |
| Post subject: | |
| Author: | pottsgroverc [ Mon Jun 30, 2008 17:25:47 ] |
| Post subject: | |
MIP makes great driver tips, they are expensive but I think worth it. And you can, as usual, send them in to have the re-cut when they wear out. |
|
| Author: | Mikey_008 [ Tue Jul 01, 2008 01:53:13 ] |
| Post subject: | |
I'm using a craftman 4.8volt driver. I've had it for about a year or so. No compaints. Also using Ofna bits. A major wrist saver. Link... http://www.sears.com/shc/s/p_10153_12605_00910165000P |
|
| Author: | HulkRay [ Tue Jul 01, 2008 02:43:34 ] |
| Post subject: | |
is it possible to use the tips from my Hudy drivers instead of buy bits?? I can just take them out of the handle and place it in the power tool.. will this work because if I have to buy new bits that will *** :-) ***.. |
|
| Author: | Keith [ Tue Jul 01, 2008 03:23:44 ] |
| Post subject: | |
| Author: | golustp [ Sun Sep 29, 2019 15:29:29 ] |
| Post subject: | Re: Power tool to work on R/C cars. |
It is really small and light and does the job. You can always tighten the screws manually when they are screwed in . |
|
| Author: | Keith [ Sun Sep 29, 2019 19:01:58 ] |
| Post subject: | Re: Power tool to work on R/C cars. |
Moderators and members. Spambot above(and below). Links are junk. don't click. |
|
| Author: | Joseph33 [ Wed Oct 02, 2019 06:40:09 ] |
| Post subject: | Capriotti's Guest Satisfaction Survey |
Welcome to our article about Capriotti’s Sandwich Shop Survey. Yes, it’s about a famous Submarine Sandwich Shop, Capriotti’s. https://surveyguides.info/ |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|