XRAY - Model racing cars

im using a:

Bosch IXO Cordless Screwdriver 3.6V
withs
Ofna attachments

it doesnt have torque settings but works perfectly just as im getting to the end of the thread either slow down or slightly blip it and the slower speed dont allow it to turn so you can tell you its done. takes a bit of practise to be fair but i have it down to a t now.

got any links for those long drivers?

dave

Many guys are using the same Bosch or one similar that's brand I can't recall. It is really small and light and does the job. You can always tighten the screws manually when they are screwed in.

Use Torx head screws and you won't strip them ever. Haven't yet stripped one. It feels so nice compared to hex heads, that you will strip sooner or later even with highest quality tools.

"Hitachi DB3DL" with the ONFA long Bits. I like the Hitachi for its two speed control, and its 21 point clutch settings. At the lower settings it won't strip out the plastic. There are many of these a the track around Ca, and everyone who I've talk to love there's too.




Here is a good deal for one. Lowe's typically sells them for 89.99. DeWalt has come out with one very similar too. Haven't see one person, just pics.

http://cgi.ebay.com/Hitachi-3-6V-Cordle ... dZViewItem

i dont know what its called but black and decker sells one with a clutcht for only $20 and it looks like the green hitachi above. its freakin awesome and would suggest any other way. EDS makes tips and OFNA makes them as well.

MIP makes great driver tips, they are expensive but I think worth it. And you can, as usual, send them in to have the re-cut when they wear out.

I'm using a craftman 4.8volt driver. I've had it for about a year or so. No compaints. Also using Ofna bits. A major wrist saver.

Link... http://www.sears.com/shc/s/p_10153_12605_00910165000P

is it possible to use the tips from my Hudy drivers instead of buy bits?? I can just take them out of the handle and place it in the power tool..



will this work because if I have to buy new bits that will *** :-) ***..

It is really small and light and does the job. You can always tighten the screws manually when they are screwed in .

Moderators and members. Spambot above(and below). Links are junk. don't click.

Welcome to our article about Capriotti’s Sandwich Shop Survey. Yes, it’s about a famous Submarine Sandwich Shop, Capriotti’s.
https://surveyguides.info/