| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 808 Wheel Bearings Durability https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7884 |
Page 1 of 4 |
| Author: | jhautz [ Thu Jun 19, 2008 20:21:08 ] |
| Post subject: | 808 Wheel Bearings Durability |
| Author: | daz.fx [ Thu Jun 19, 2008 21:52:40 ] |
| Post subject: | |
| Author: | jhautz [ Thu Jun 19, 2008 22:00:12 ] |
| Post subject: | |
| Author: | jhautz [ Thu Jun 19, 2008 22:40:20 ] |
| Post subject: | |
| Author: | Bren Ralls [ Fri Jun 20, 2008 07:26:14 ] |
| Post subject: | |
| Author: | jhautz [ Fri Jun 20, 2008 07:55:20 ] |
| Post subject: | |
| Author: | BGMock [ Fri Jun 20, 2008 08:32:17 ] |
| Post subject: | |
| Author: | jhautz [ Fri Jun 20, 2008 08:41:59 ] |
| Post subject: | |
| Author: | Bife [ Fri Jun 20, 2008 10:04:05 ] |
| Post subject: | |
| Author: | Edwin Pibal [ Fri Jun 20, 2008 10:35:42 ] |
| Post subject: | |
| Author: | Oli [ Fri Jun 20, 2008 10:45:07 ] |
| Post subject: | |
| Author: | Tricksy [ Fri Jun 20, 2008 16:26:32 ] |
| Post subject: | |
| Author: | Keith [ Fri Jun 20, 2008 17:39:07 ] |
| Post subject: | |
| Author: | jhautz [ Fri Jun 20, 2008 17:39:20 ] |
| Post subject: | |
Please dont read this thread as I am unhappy with the 808. In general I have found it to be an extreemely durable buggy and it performs better than anything else I have ever had on the track as well. If this wheel bearing issue turns out to be my biggest problem I will consider this the best buggy I ever owned. Every car I have ever had has had one issue or another. Some of them are small issues, and some were not so small. With any new vehicle there are things that no matter how much testing you do, in the hands of the general public things will show up. This seems to be a minor one to me. The only reason I am bringing it up is I wanted to find out if I was the only one who noticed the fact that it seems to take some extra maintenance in this area vs what I am used to. It seems that some are seeing the same thing as me and others are not. One of the great things about xray is this forum and tha ability to talk to the other owners, the team drivers, and Xray staff all the way up to Mario himself. I just wanted to give some feedback to my observation and see if there was possibly something I was missing or could be doing to help improve the wear I am seeing. While I'm sure there is some sort of performance gain by going with the smaller bearings, for myself (a lowly middle of the pack club racer) I would personally prefer being able to use a bit bigger bearing to try and extend the replacement time/reduce maintenance. Just my feedback. Take it as you will. |
|
| Author: | Andy Taylor [ Fri Jun 20, 2008 18:33:45 ] |
| Post subject: | |
| Author: | jhautz [ Fri Jun 20, 2008 19:17:44 ] |
| Post subject: | |
| Author: | auto2 [ Sat Jun 21, 2008 12:24:28 ] |
| Post subject: | |
| Author: | Ashalak [ Sat Jun 21, 2008 13:26:14 ] |
| Post subject: | |
| Author: | jhautz [ Sat Jun 21, 2008 18:45:21 ] |
| Post subject: | |
| Author: | Mader [ Tue Jun 24, 2008 03:03:11 ] |
| Post subject: | |
| Page 1 of 4 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|