| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Missing part https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7880 |
Page 1 of 1 |
| Author: | Mattias [ Thu Jun 19, 2008 10:25:46 ] |
| Post subject: | Missing part |
| Author: | daveg [ Thu Jun 19, 2008 10:38:25 ] |
| Post subject: | |
| Author: | Mattias [ Thu Jun 19, 2008 10:45:31 ] |
| Post subject: | |
| Author: | Oli [ Thu Jun 19, 2008 12:31:19 ] |
| Post subject: | |
Hi Mattias, It's a shame you think this part is missing form your kit, as this is very uncommon. What I would do is contact your local distributer and see what they suggest - they may be able to send you a replacement. The purpose of this part is to keep dirt out of the diff/ gearbox casing, so you may be able to seal it with silicone in the short term. |
|
| Author: | brano [ Thu Jun 19, 2008 13:18:36 ] |
| Post subject: | |
Yes, contact your distributor in Sweden at info@minicars.se who will let you know where and how to get the #355690 XB808 Composite Pinion Seal. |
|
| Author: | Mattias [ Thu Jun 19, 2008 13:30:48 ] |
| Post subject: | |
Thanks. I will do! |
|
| Author: | Keith [ Thu Jun 19, 2008 13:42:09 ] |
| Post subject: | |
That littlle plastic plug was a PITA to put in, thought about tapping the hole for a short set screw. |
|
| Author: | boogeyman [ Thu Jun 19, 2008 17:07:50 ] |
| Post subject: | |
| Author: | jhautz [ Fri Jun 20, 2008 21:20:36 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|