XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Cut the hubs or not ? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7831 |
Page 1 of 1 |
Author: | Bife [ Wed Jun 11, 2008 09:50:27 ] |
Post subject: | Cut the hubs or not ? |
I'm feeling that my car has low steering :S I am thinking of cutting the c-hubs like they were used to do on the EC. I'm using 5 5 3 in the diffs so I think that it isn't a diff problem, but a steering problem. What can I do to improve steering ? ![]() |
Author: | XT8Truggy [ Wed Jun 11, 2008 09:59:59 ] |
Post subject: | |
You can't be serious. ![]() I assume you are talking about the 808. |
Author: | sturla [ Wed Jun 11, 2008 10:08:13 ] |
Post subject: | |
Do you find the car to have low steering into the turn or out of the turn. Maybe you could post your setup? Steering should not be a issue on the 808. |
Author: | Bife [ Wed Jun 11, 2008 10:17:03 ] |
Post subject: | |
Of course I'm talking about the 808 lol. It has super low steering entering corners. I have to slow down a lot, I'm MUCH faster with the previous EC than with this new 808 ![]() |
Author: | sturla [ Wed Jun 11, 2008 11:08:03 ] |
Post subject: | |
I suggest you try the basic setup for the 808, steering should not be a problem on that setup. If you still find the car to have low steering entering a corner I suggest you try other tires. |
Author: | Craige Lewis [ Wed Jun 11, 2008 11:18:47 ] |
Post subject: | |
WOW thats a first ![]() Craige |
Author: | daveg [ Wed Jun 11, 2008 12:13:12 ] |
Post subject: | |
check your servo saver is tight..it could also be too much rear end grip maybe? as said..the 808 is super tight on steering. |
Author: | Mader [ Wed Jun 11, 2008 12:33:54 ] |
Post subject: | |
That is kinda crazy dude! Make sure your servo saver didn't loosen up. when I built my 808 I wanted to make sure I got the spring tension right before I hit it with the loctite and guess what.......I forgot and it came loose in the A main and I didn't finish! ![]() |
Author: | XT8Truggy [ Wed Jun 11, 2008 12:53:14 ] |
Post subject: | |
Don't take this the wrong way. But you do have the c-hubs on the right way? |
Author: | Little chris [ Wed Jun 11, 2008 15:14:39 ] |
Post subject: | |
I think you will find is the problem is with the tyres i had the issue of no steering once and found it to be the tyres gave to much grip i changed the tyres went back out and the problem was sorted Cheers Chris |
Author: | Keith [ Wed Jun 11, 2008 17:26:14 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |