XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Servo Burning out https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7823 |
Page 1 of 1 |
Author: | HulkRay [ Tue Jun 10, 2008 01:57:45 ] |
Post subject: | Servo Burning out |
Author: | Tank time [ Tue Jun 10, 2008 02:47:21 ] |
Post subject: | |
Author: | ldp787 [ Tue Jun 10, 2008 03:27:45 ] |
Post subject: | |
Author: | Bren Ralls [ Tue Jun 10, 2008 07:02:58 ] |
Post subject: | |
Author: | HulkRay [ Tue Jun 10, 2008 12:23:05 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue Jun 10, 2008 15:56:18 ] |
Post subject: | |
Another thing that will fry a servo very quickly is if the bottom of the servo is touching the chassis or side guard. If it's touching the chassis I would suggest shimming the servo with some of the T2 aluminum suspension shims [303134], and if it's hitting the side guard, just dremel that back. |
Author: | boogeyman [ Tue Jun 10, 2008 18:03:10 ] |
Post subject: | |
Author: | ers [ Tue Jun 10, 2008 19:03:41 ] |
Post subject: | |
Author: | Tank time [ Tue Jun 10, 2008 23:02:12 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |