| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XT8 setup question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7809 |
Page 1 of 1 |
| Author: | nuclear1 [ Sun Jun 08, 2008 18:10:37 ] |
| Post subject: | XT8 setup question |
I'm currently running the stock setup as a baseline but would like to reduce the amount of "push" in the corners. What do I change or experiment with to help with this? |
|
| Author: | Richmond [ Sun Jun 08, 2008 19:01:45 ] |
| Post subject: | |
Lower the rear diff oils to 5,000 and increase camber to -3 degrees and lower rear roll center. Put rear toe at -2 degrees. I did this and it was too loose for my driving style. |
|
| Author: | ldp787 [ Sun Jun 08, 2008 22:50:28 ] |
| Post subject: | |
Try Ian Haleys setup from MORBC I believe, I did everything on here except stock roll bars, 800 cst all around with the four hole pistons and dfferent tires. I pm'd him about a few more things, the stock shim for bumpsteer was used and the steering mod was done. Dig around for it it was posted by Bren Ralls. In addition get the new 5mm offset hubs just released and standard offset wheels. The measeurement I got was this puts TW just under stock. I too had the issue and it got better with some small changes but this thing came alive with Ian's setup for my track. This friggin thing turns like crazy now. The only changes I'll make is to get the 3.0 roll for a little more on power steering and increase the center diff. Getting the truck back to standard wheelbase is top priority IMO. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|