| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Front Diff Case has Broke twice https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7680 |
Page 1 of 3 |
| Author: | robknasel [ Sat May 17, 2008 03:03:13 ] |
| Post subject: | Front Diff Case has Broke twice |
| Author: | Steve Walters [ Sat May 17, 2008 05:23:42 ] |
| Post subject: | |
| Author: | robknasel [ Sat May 17, 2008 12:33:17 ] |
| Post subject: | |
| Author: | motorboyduc [ Sat May 17, 2008 12:55:03 ] |
| Post subject: | |
mine has broken to at the place where the screw for the top suspension . |
|
| Author: | Bren Ralls [ Sat May 17, 2008 16:11:50 ] |
| Post subject: | |
| Author: | motorboyduc [ Sat May 17, 2008 17:06:44 ] |
| Post subject: | |
| Author: | daz.fx [ Sat May 17, 2008 20:12:18 ] |
| Post subject: | |
| Author: | opliko [ Sat May 17, 2008 20:15:04 ] |
| Post subject: | |
| Author: | Steve Walters [ Sat May 17, 2008 22:34:36 ] |
| Post subject: | |
| Author: | CrimeWave [ Sun May 18, 2008 04:59:27 ] |
| Post subject: | |
| Author: | Mader [ Sun May 18, 2008 17:24:42 ] |
| Post subject: | |
| Author: | GAnderson [ Sun May 18, 2008 19:44:34 ] |
| Post subject: | |
| Author: | low10s [ Mon May 19, 2008 04:43:43 ] |
| Post subject: | |
| Author: | Captain America [ Mon May 19, 2008 05:27:08 ] |
| Post subject: | |
| Author: | Taurius [ Mon May 19, 2008 06:41:02 ] |
| Post subject: | |
| Author: | auto2 [ Mon May 19, 2008 13:03:50 ] |
| Post subject: | |
the more broken parts xray gets the better chance they have to improve the breed. if that statement is correct then he is more than justified in posting.xray is more than capable of analyzing a part and figuring out if it is normal ware and tare or if it needs to be adjusted in some way. |
|
| Author: | vti-chris [ Mon May 19, 2008 13:24:28 ] |
| Post subject: | |
And this is the only way to improve the car. Sponsored team drivers can only give minimum feedback on the durability of the buggy. It's the average driver(s) who don't drive like the PROs that will put this buggy to the test as far as reliability is concerned. And these drivers aren't just a few 
|
|
| Author: | Mader [ Mon May 19, 2008 14:30:01 ] |
| Post subject: | |
Some of you guy,s need to relax. This is strictly an informative posting for XRAY and racer's by a person who fully supports XRAY and actually is serious about racing with way better than average skills. I don't need a lecture from someone who has no clue. I have posted a picture for those who may like to see. There again this was probably a fluke but if it turns out that this should become an issue it might be helpful. By the way this was the first big race of the year for us with the new 808 and the performance was unbelievable. My wife took 3rd place in the Sportsman A main. And I got 4th in Expert B . |
|
| Author: | Svanur [ Mon May 19, 2008 15:51:37 ] |
| Post subject: | |
I have newer seen anything like this before. From the pictures and your story, I would think this must be caused by some serious material or design failure. Have XRAY new contractor or factory who make plastic parts? Have the design of the bulk heads or how shock tower is fastened to the bulk head changed from EC? Up to now, I have believed that Xray was using the strongest material on the RC market. I know that in plastic molding can one wrong plastic pearl ruin the hole production. I wish you good luck and surely hope they will overcome all production failure before I buy my XB80x 
|
|
| Author: | CrimeWave [ Mon May 19, 2008 15:53:43 ] |
| Post subject: | |
looks like you would be happy with the aluminum front tower.... |
|
| Page 1 of 3 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|