XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
808 Throttle Linkage ? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=9&t=7635 |
Page 1 of 2 |
Author: | Qball [ Tue May 06, 2008 14:00:53 ] |
Post subject: | 808 Throttle Linkage ? |
Author: | x-r-a-y [ Tue May 06, 2008 15:31:50 ] |
Post subject: | |
Author: | wirtz88 [ Tue May 06, 2008 16:34:04 ] |
Post subject: | |
Author: | x-r-a-y [ Tue May 06, 2008 16:40:49 ] |
Post subject: | |
Author: | PaulBronca [ Tue May 06, 2008 16:47:43 ] |
Post subject: | |
Mario Hudy knows about this problem in the manual. Build the linkage this way : http://www.buggy-sport.info/popup.php?i ... 91_05i.jpg [url] regards, paul bronca [/url] |
Author: | wirtz88 [ Tue May 06, 2008 16:48:47 ] |
Post subject: | |
I'm a dork...lol...I read it wrong. I meant the brake linkages on mine. My throttle linkage lined up perfect. Yes you are right on the carb adjustment. Is your up/down angle sharp on the brakes? Paul I have my linkages in that way, but my up/down angle is so sharp on my brake linkages that I can only tighten the screw on the brake side half way down. I am going to study the pic again and recheck my brake side, but so far I can't get mine anywhere near that level. |
Author: | x-r-a-y [ Tue May 06, 2008 17:27:01 ] |
Post subject: | |
Author: | BHowe [ Tue May 06, 2008 17:41:24 ] |
Post subject: | |
Here's some pictures of mine. I hope it helps. |
Author: | HulkRay [ Tue May 06, 2008 17:51:25 ] |
Post subject: | |
BHowe whats the fuel tube in the antenna for?? Also where did you get the servo mounting plates that are holding the servo? |
Author: | BHowe [ Tue May 06, 2008 17:53:52 ] |
Post subject: | |
The tube on the antenna just keeps it from coming out, or breaking. Just added insurance. Those mounts on the servo's are just the standard Futaba rubber grommets. |
Author: | Qball [ Tue May 06, 2008 20:58:51 ] |
Post subject: | |
Author: | Qball [ Tue May 06, 2008 21:00:10 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue May 06, 2008 21:07:37 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue May 06, 2008 21:08:43 ] |
Post subject: | |
That's at neutral. |
Author: | Andy Taylor [ Tue May 06, 2008 22:45:29 ] |
Post subject: | |
Author: | lauri [ Tue May 06, 2008 23:14:28 ] |
Post subject: | |
Author: | Rocco Margiotta [ Tue May 06, 2008 23:39:28 ] |
Post subject: | |
Author: | MikeIz [ Wed May 07, 2008 04:37:30 ] |
Post subject: | |
Rocco: sup man! i was wondering on the transponder if i mount it per instructions it looks like it could get damaged. i see yours is mounted different, what you do? thanks! |
Author: | Andy Taylor [ Wed May 07, 2008 09:09:55 ] |
Post subject: | |
Author: | Jason Branham [ Wed May 07, 2008 14:54:06 ] |
Post subject: | |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |